Product Structure
P.5
Notice Before Use
P.4
1. Before plugging in the appliance, check that the electrical rating shown on the rating plate corresponds with your
home electricity supply.
2. Never submerge the unit base of the appliance in water or other fluids, nor rinse it under the tap, to avoid risk of short-
circuit or electric shock. If there is water inside the unit base, please contact German Pool or a licensed technician for
repair.
3. Never put the power cord or plug into water for cleaning. Do not wipe the plug prongs with damp cloth, nor plug in with
wet hands.
4. Plug the appliance to the wall outlet properly and securely. Loose plug may lead to overheating or electric shock.
5. If the power cord is damaged, it must be replaced by the manufacturer, its service agents or qualified electricians in
order to avoid a hazard.
6. Never leave the appliance unattended.
7. Keep hands and utensils out of the container while the motor is running to prevent the possibility of severe personal
injury and/or damage.
8. Do not run the appliance without loading in the blender jar.
9. To prevent spillage, do not put liquid in the blender jar exceeding the MAX line.
10. Do not expose the appliance to heat sources such as a radiator or sunlight. For good ventilation, do not place cloth
underneath the appliance.
11. The appliance is for indoor use only.
12. Always operate with the lid in place. When processing hot beverages, properly secure the lid and measuring cup in
place to avoid scalding due to spraying of hot liquids.
13. The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or any individual lack of experience and knowledge, unless they have been given supervision or
instruction by a person responsible for their safety.
14. Children should be supervised to ensure that they do not play with the appliance.
15. Switch off the appliance and disconnect from supply before changing accessories or touching any rotating parts.
16. The blade is very sharp, use with caution when handling the blade, emptying the jar and during cleaning. Do not
attempt to disassemble the blade assembly and touch any rotating parts.
17. Unplug the power cord from the wall outlet when the appliance is not in use, before putting on or taking off parts,
and before cleaning.
18. If the motor has overheated, the temperature monitoring system will be triggered and the motor will stop.
Switch off the appliance and let the motor cool down. The motor temperature monitoring system will reset after the
food processor is unplugged from wall socket for 45 minutes.
19. Any servicing should be performed by an authorised service representative. Do not attempt to disassemble, repair
or modify the appliance.
Unit Body
Important
- For safety purpose, you should read the instructions carefully before using the appliance for the first time. Save
the instructions for future reference.
- The appliance is designed for domestic use and may only be installed and operated in accordance with this
instruction manual.
- Do not run the appliance without loading. It is strictly forbidden to operate this appliance without the presence of
any liquids, solids or semi-solids inside the blending jar.
Control Panel
Power Cable
Stirring Rod
Measuring Cup
Lid
Blender Jar
Blade Assembly
Blade Mount
Drive Coupling
Safety Lock
Cushion Base
Unit Base
Anti-Skid Rubber
