German pool PAM-281, Руководство пользователя

Страница: 16 / 19

P.30 P.31
Mixing and Kneading
1. Place the appliance on a stable and level surface, make
sure the appliance has been properly installed.
2. Open the top cover, make sure the kneading blade and
slat are properly in place.
3. Add a cup of flour into the kneading chamber.
4. Close the top cover and secure with safety bracket.
Note:
• Make sure the press button is in the direction of the
extrusion nozzle when inserting the slat. Ensure the
slat is fully inserted.
• Disconnect the power when adding flour.
5. Press the ‘Power ’ button. The corresponding indica-
tor lights up. Press the ‘Knead /Extrude ’ button.
The corresponding indicator lights up. Kneading begins.
The default kneading time is 5 minutes. Press ‘ ’ or ‘
’ to adjust kneading time.
6. Use the measuring cup to pour an appropriate amount
of water into the kneading chamber.
Note:
• Press the “Knead/Extrude” button before adding wa-
ter into the kneading chamber (according to personal
preferences).
• It is recommended to add a small amount of salt
and oil to the water (the recommended amount is 5g
of salt and 5ml of oil; adjust according to personal
preferences).
• You can add different kinds of vegetable juice (e.g.
tomato, spinach juice etc.) or eggs to the water. Mix
well and pour into the kneading chamber.
Do not open the top cover during the kneading
process.
Add
Water
200g
Make sure the power supply is disconnected before dismounting, and remove the parts in the reverse
order of installation. To remove the extrusion box, press the unlock button while rotating the extrusion box
clockwise. Clean the main unit with a slightly damp cloth, and the other parts with water. Clean out flour
residue with brush. After cleaning, air-dry the appliance and store it in a dry and ventilated environment.
Check the extrusion rod and the seal at the bottom of the kneading chamber for flour residue. Gently
take out the tail of the brush, and use it to pick out flour residue on the extrusion rod, otherwise it will be
difficult to fix the extrusion nozzle at the right position. Pick out the seal ring of the kneading chamber
gently with hard and fine object (such as chopstick). Flush it with water and put the seal back in place.
The extrusion box cannot be removed without pressing the unlock button.
Do not submerge the main unit in water or other liquids.
After cleaning the seal ring, remember to attach it back to the kneading chamber.
unlock button
Plastic Seal
Adding Flour Dismounting and Cleaning
Operating Instructions Operating Instructions