P.6
7. 將排氣管連接到所需要的機身出風口(如需
冷氣便將管接到冷氣出風口，如需暖氣便將
管接到暖氣出風口)。透過接合器將排氣管
另一端接連到室外窗隔上(看圖2)。
8. 確保所有接口都是正確和穩固，機身沒有
破損，及連接移動空調的插座電壓符合本
產品規格列明之要求。如果使用室外插座，
插座必須符合室外電源插座的要求。若一
切妥當，把插頭插入插座。
9. 將遙控器對着室內的窗隔遙控接收器，以控
制移動空調。
7. Connect one end of the exhaust pipe to the
air outlet on the air conditioner that blows out
cool air (if you wish to use the cooling function)
or to the air outlet that blows out hot air (if you
wish to use the heating function). Connect the
other side to the outdoor window plate via the
pipe connector (see Fig 2).
8. Make sure that all connections are secured
properly, that the unit is not damaged and
that the socket connected to the air conditioner
complies with the voltage as stated on the
specification plate. If you are using an outdoor
socket, it must fulfill the requirements of an
outdoor electrical socket. If everything is
checked alright, insert the plug into the socket.
9. You can now operate the air conditioner with
the digital remote control. Make sure to direct
it towards the receiver on the indoor window
plate.
註
:
排氣管與機身連接的位置跟在室內使用時
是相反的。
Note:
The exhaust pipe is now positioned on the
opposite side to where the pipe is postioned when
the Portable Air Conditioner is located indoors.
安裝說明
Installation Instructions
排氣管
Exhaust Pipe
排氣管
Exhaust Pipe
窗
Window
圖2
(Fig 2)
