GLP
German Light Products GmbH
(instruction version
1.07)
27
7) Open the module and put it on the backside down. You can now reach all
Gobo- or Color wheels.
8) Realize the exchange or service as desired
Æ
see following chapters below.
9) Fold up the module again and screw up the three knurled screws by hand.
10) Insert the plug-in back to the fixture and the two lateral tracks. Push it carefully
down until the two locking screws snap in. Close them hand-screwed.
11) Connect the "Data Bus" cable with the corresponding socket again.
12) Close the
Y
Y
P
P
O
O
C
C
7
7
0
0
0
0
in reverse order.
6.3 Changing Gobos and Color filters
The is
Y
Y
P
P
O
O
C
C
7
7
0
0
0
0
equipped both with Aluminum- and Glass gobos (outside
diameter 27 mm, image size 23 mm). When using customized Gobos like
company logos and writing the recommended image size is 20 mm. You can use
either Aluminum (thickness = 0.3 mm) or glass gobos (thickness = 1.1 - 3.0 mm).
There are two Gobo wheels with rotating Gobos and one with fixed Gobos. All
Gobos as well as the Color filters can be exchanged as desired.
6.3.1 General remarks for changing Gobos and Colors
All Gobos, Color filters or other optical effects do have a dedicated
mounting direction. To prevent undesired damages and to optimize the
optical illustration, all effect should be mounted with their reflecting side in
