GLP
German Light Products GmbH
(instruction version
1.07)
25
reached the most even illumination. Note: A slide hotspot will always remain
and is conditional to the optical system.
6 Optical plug-in module (inside the fixture)
The
Y
Y
P
P
O
O
C
C
7
7
0
0
0
0
is equipped with an optical plug-in which can removed completely. This
allows you a very comfortable and fast way to do all types of services inside the fixture
like as changing gobos and colors, cleaning or maintenance. Please apply for this the
following procedure:
6.1 Safety
regulations
•
Pull out the main plug!
•
Wait min. 20 minutes after the last operation to cool down the fixture.
•
For a safe and convenient operation the head can be locked in various
positions. Please unlock the head before switching on again.
•
Don’t touch the bulb of the lamp with bare fingers (this can cause damages).
•
Before you put the
Y
Y
P
P
O
O
C
C
7
7
0
0
0
0
into operation close the casing, otherwise your
retina can be hurt!
6.2 Taking out and opening optical plug-in
1) Please lock the head for a safe and convenient
operation.
2) Open the upper shell of the head casing by loosening
the 4 quick release fasteners. Two on the front side
and 2 on the back side of the head. Hang out the
head safety.
3) Disconnect the right "Data Bus" cable from the circuit
board of the plug-in. This is the only connection
which needs to be removed.
4x 90°
