GLP German Light Products GmbH
(Instruction version: 1.1) / from software version: V1.09
17
Attention:
•
Never let optical parts come into contact with oil or fat.
•
Before running the fixture wait until all parts are dry.
•
Never tough lenses with bare fingers.
5.3 Changing the Fuse
Follow the safety regulations as described above!
The micro-fuse holder (2) is located on the topside of the base. In order to attain
access you first need to remove one of the two plastic side covers of the fixture
arm. Open the two screws no. 1 shown in the picture below.
Replace the fuse with one with the exact rating as printed in this manual or the
body of the fixture. Never use a different one!
Attach the side cover again before operating the fixture.
1
1
2
2
