Gericom Hollywood 8060, Руководство пользователя

Страница: 103 / 123

Troubleshooting 8-5
You cannot eject a CD.
z
The CD is not properly seated in the drive. Manually release the CD
following the method described next:
1. Turn off the system.
2. Insert a small rod, such as a straightened paperclip, into the
drive’s manual eject hole and push firmly to release the tray.
3. Pull the tray out until fully extended, and then remove the CD.
Display Problems
Nothing appears on the screen.
z
During operation, the screen may automatically turn off as a result of
power management. Press any key to see if the screen comes back.
z
The brightness level might be too low. Increase brightness by
pressing
Fn
+
F7
.
z
The display output might be set to an external device. To switch the
display back to the LCD, press
Fn
+
F5
, or change the display through
the settings in Display Properties.
The characters on the screen are dim.
z Adjust the brightness and/or contrast.