Gericom Hollywood 8060, Руководство пользователя

Страница: 111 / 123

Troubleshooting 8-13
The computer does not resume from Standby or Hibernation mode.
z
The computer automatically enters Standby or Hibernation mode
when the battery pack is empty. Do any one of the following:
−
Connect the AC adapter to the computer.
−
Replace the empty battery pack with a fully charged one.
The computer does not enter Hibernation mode with the
Fn
+
F12
hot
keys.
z Make sure that the Hibernation function is specified for the sleep
button.
z You might be using a PC card that prevents the computer from
entering Hibernation mode. To enter the mode, stop the
communication program and then remove the card or stop the card.
Printer Problems
The printer does not work.
z Make sure that the printer is turned on (if it comes with an
independent power source) and is online (ready to use).
z Make sure that the printer’s signal cable is properly connected.
z Make sure that the printer driver is correctly installed.
z Make sure that you have assigned the printer port correctly in your
operating system or application program.
z
Make sure that the printer port is enabled in the SCU program.
The printer prints garbled information.
z Make sure that the printer driver is correctly installed.
z Make sure that the printer cable is properly connected.