Gerber 0040110 Series, Руководство пользователя

Страница: 5 / 6

III
IV
Gerber Plumbing Fixtures LLC.,
PROFESSIONALLY MADE. PROFESSIONALLY SOLD.
PROFESSIONALLY INSALLED.
www.Gerberonline.com
(4) ATTACHING WATER SUPPLY:
• Connect water supply lines using supply nuts.
• If available, hook up drain before next step. If drain is
not available, use a bucket to catch flush water.
• Remove aerator.
• Turn on cold water – allow to run for 30 seconds –
check cold water supply for leaks.
• Repeat last step for hot water supply.
• Replace aerator.
• If applicable, test sprayer at this time.
(3) INSTALLING THE FAUCET:
• Apply plumbers putty or other sealant between
faucet & sinks.
• Install the faucet through the mounting holes.
• Attach locknuts and finger tighten over supply shanks.
• Align kitchen faucet as desired and securely
tighten locknuts.
V
Do NOT use detergents, cleaners or other abrasive materials as they
may damage the finish and void the warranty.
DECORATIVE FINISHES:
The use of 100% non-abrasive wax, such as TURTLE WAXT-15
applied with a 100% cotton cloth, will clean and brighten the
surfaces and provide protection for easier cleaning.
With proper care, your new GERBER product will give you years
of trouble free service and enjoyment. Use only 100% cotton cloth
dampened wit water to clean.