AccuPlot and AccuJet Maintenance
Plotter Pen Maintenance
5-15
AJ-520 Pen Maintenance
Figure 5-1 illustrates the AJ-520 longlife pen assembly.
WARNING: F
AILURE TO DISABLE SERVO POWER BEFORE PUTTING YOUR HANDS IN
OR NEAR THE PLOTTING AREA CAN RESULT IN INJURY
.
ink reservoir
fill cap
ink supply tube
pen
Figure 5-1 AJ-520 Longlife Pen Assembly
T
O REPLACE THE
AJ-520 L
ONGLIFE PEN
1. Turn Servo Power off.
2. Open a sliding cover so that you can reach the carriage.
3. Loosen the pen cartridge clamping screw and lift the old pen out of
the pen holder. Discard the old pen.
4. Insert the new pen into the pen holder and tighten the pen cartridge
clamping screw.
5. Close the sliding cover to begin plotting.
inkjet cartridge
