Instructions for Use
Spirostik Complete
Serial no.: xx|8|102|yyy and 2103xxxxx
Version: 7
| Release date: 14. July 2021
Page 53
1.
Switch on the PC.
For this:
Touch the LED standby button about
3 sec
PC starts with a short delay.
Windows interface including
symbol for BLUE CHERRY®
appears.
Spirostik Complete is ready for
use.
Status LED on the back of the
device lights up green;
LED standby button white.
If the calibration, as in chap. 6.1.2.3 "Calibrate Spirostik
Complete", has not been carried out, it must be carried out
subsequently, otherwise no functional readiness is possible.
ca. 3 s
