September 2010
Manuale Operatore Piegatrice Mondial
4
•
Never remove covers or guards that are fastened with screws. There
are no operator serviceable areas within these covers.
•
Never locate the equipment near a radiator or any other heat source.
•
Never push objects of any kind into the ventilation openings.
•
Never override or “cheat” any of the electrical or mechanical
interlock devices.
•
Never operate the equipment if you notice unusual noises or odors.
Disconnect the power cord from the electrical outlet and contact
your local Service Provider immediately.
Radio Frequency Emissions
This equipment has been tested and found to comply with the limits for
a class A digital device, pursuant to Part 15 of the FCC Rules and EN
55022 standard for EMC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense.
Changes and modifications to this equipment not specifically approved
by GERA void the user’s authority to operate this equipment.
Product Safety Certification
This product is certified by the following Agency using the Safety
standards listed.
Agency Standard
UL
UL60950-1, 1
st
Edition (2006)
DEMKO
IEC 60950-1, 1
st
Edition (2001)
This product was manufactured under a registered ISO 9001 Quality
system.
Regulatory Information
The CE mark applied to this product symbolizes GERA’s declaration of
conformity with the applicable Directives of the European Union.
A full declaration of conformity, defining the relevant directives and
referenced standards, can be obtained from your Authorized Local
Dealer.
Environmental Compliance
Directive WEEE 2002/96/CEE
This symbol means the need to dispose the product
according to the law in force in the own country.
Before dispose the GERA product, mind that it
contains lead and other materials that could require
specific procedures for the disposing. The lead
quantity is fully compliant with the international in
force when the product was put on the market
