9
3.2.3. Editing Setting Parameters
This example describes how to edit ‘DC Output Voltage’ parameter; also applicable for editing other
setting parameters.
1. On default screen press SET for Main Menu.
2. Press SET again to adjust any parameter on the screen. After pressing SET, cursor will be
move onto ‘U’ parameter.
3. Use UP and DOWN buttons to adjust the parameter. To cancel press ESC. Press SET to
move onto next parameter ‘I’.
4. Again, use UP and DOWN buttons to adjust the parameter or skip adjusting by pressing SET.
5. Verification dialog will be shown. Press SET to verify or ESC to revert the changes.
