52
6.3 Connecting SQP110 Series to the CMS
To connect the SQP110 series to the CMS Lite, you have to set up the network settings.
1. Use the USB to RJ-45 cable, connect the SQP110 series to the network.
2. Enter the OSD menu of the SQP110 series and then select
Network Setup
.
Figure 6-5
3. To specify the IP address of the SQP110 series, select
Setup IP Address
and then select
Manually
to enter a fixed IP address, subnet mask and gateway. Or you can select
Automatically
to obtain a dynamic IP from the DHCP Server.
4. To specify the IP address of CMS Lite, select
Setup CMS IP
and then enter a fixed IP
address.
5. If you want to modify the CMS port, select
Setup CMS PORT
and then enter the new port
to match the port on the CMS Lite. The default CMS port is 10000.