manualshive.com logo in svg

GeoVision SQP110 Series, Руководство пользователя, Страница: 105 / 105

Поделиться
Скачать
GeoVision SQP110 Series Скачать руководство пользователя страница 105

Warranty Policy 

 

  99

Limitation of Liability 

Regardless whether any remedy set forth herein fails of its essential purpose or otherwise, in 

no event will GeoVision, iDi Signage or its suppliers be liable for any lost revenue, profit or lost 

or damaged data, business interruption, loss of capital, or for special, indirect, consequential, 

incidental, or punitive damages however caused and regardless of the theory of liability or 

whether arising out of the use or inability to use the GeoVision and iDi Signage Products or 

otherwise and even if GeoVision or iDi Signage has been advised of the possibility of such 

damages. In no event shall GeoVision and iDi Signage liabilities to customer, whether in 

contract, tort (including negligence), breach of warranty, or otherwise, exceed the price paid 

by customer for the Software that gave rise to the claim or if the Software is part of another 

Products, the price paid for such other Products. Because some states or jurisdictions do not 

allow limitation or exclusion of consequential or incidental damages, the above limitation may 

not apply to you. In no event shall GeoVision’s and iDi Signage’s total liabilities to you for all 

damages (other than as may be required by applicable law in cases involving personal injury) 

exceed the amount of two hundred dollars (U.S. $200.00). The foregoing limitations will apply 

even if the above stated remedy fails of its essential purpose. 

 

Customer agrees that the limitations of liability and disclaimers set forth herein will apply 

regardless of whether customer has accepted any other Products or service delivered by 

GeoVision. Customer acknowledges and agrees that GeoVision has set its prices in reliance 

upon the disclaimers of warranties and the limitations of liability set forth herein, that the same 

reflect an allocation of risk between the parties, and that the same form an essential basis of 

the bargain between the parties.   

 

These Warranties shall be governed by and construed in accordance with the laws of Taiwan, 

Republic of China and United State, without reference to or application of choice of law rules 

or principles. The United Nations Convention on the International Sale of Goods shall not 

apply. If any portion hereof is found to be void or unenforceable, the remaining provisions 

shall remain in full force and effect. 

GeoVision Inc.

 

Warranty Policy last updated on December 12, 2011. 

 

Содержание SQP110 Series










































































































Отзывы:

Нет отзывов