GeoVision GV-VS12 Скачать руководство пользователя страница 83

Страница: 83 / 133

Administrator Mode

4.8.7 Tools

This section allows you to execute certain system operations and view the firmware
version.

Figure 4-37

[Host Settings]

Enter a descriptive name for the GV-Video Server.

[Firmware Update]

This field displays the firmware version of the GV-Video Server.

[System Settings]

Clicking the

Load Default

button will make the GV-Video Server

restore factory default settings. The Ready LED on the front panel will turn off. Wait until
the Ready LED turns on and re-log in the server.

Note:

After applying the default function, you will need to configure the GV-Video

Server’s network setting again.

[Reboot]

Clicking the

Reboot

button will make the GV-Video Server perform the software reset. The

Ready LED on the front panel will turn off. Wait until the Ready LED turns on and re-log in
the server.

Содержание GV-VS12






































































































































Результаты поиска

Содержание GV-VS12

Отзывы:

GeoVision GV-VS12, Руководство пользователя, Страница: 83 / 133

Результаты поиска

Содержание GV-VS12

Отзывы: