GeoVision GV-VS12 Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 133

GeoVision GV-VS12 Скачать руководство пользователя страница 50

4.2.3 GPS/Wiegand

Figure 4-12

GPS Function

Note this function is only available for GV-VS02 (Hardware Version 2.0), GV-VS02A and
GV-VS12.

You can select either GPS or Wiegand function for use. The two functions cannot be
enabled at the same time.

To enable the GPS function, a GV-GPS module or any GPS module supporting UART or
RS-232 interface is required to connect to the GV-Video Server first. See

Chapter 9

Auxiliary Device Connectors.

Select GPS Baudrate:

Two baud rate options are available: 4800 and 9600. By

default the value is 9600.

Set GPS Update Period:

Set the update frequency in seconds for GPS data.

After the GPS function is activated, you can view the location of the GV-Video Server on
Google Maps. See

6.3 GPS Tracking

. If the monitoring is also activated, the GPS tracking

routes will be recorded along with videos. This makes it possible to play back tracking
routes and videos together on GV-System. See

5.2.3 Playback of GPS Tracking Routes.

42

«
...
48
49
50
51
52
...
»

Содержание GV-VS12






































































































































Отзывы:

Нет отзывов