GeoVision GV-VS12 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 133

GeoVision GV-VS12 Скачать руководство пользователя страница 10

1.1.3 GV-VS12

Figure 1-3

1.  AC Power Cord x 1
2.  Power Adaptor x 1
3.  I/O Cable with RJ-45 Connector x 1
4.  Wall Hook x 1
5.  Conical Anchor x 2
6.  Screw x 4
7.  Sticker (for positioning conical anchors) x 1
8.  GV-Video Server Software DVD x 1
9.  GV-Video Server User’s Manual x 1

1.2 System

Requirement

Microsoft Internet Explorer 6.x or later

1.3 PoE Support

The models supporting PoE (Power over Ethernet) include:

•

GV-VS02 (Hardware Version 2.0), GV-VS02A and GV-VS12.

When the PoE (Power over Ethernet) function is used, please note:

•

The I/O terminal functions cannot work. Don’t connect any devices to the I/O terminal
block on the rear panel of the unit.

•

External power supply is required for USB storage device when used for recording.

See “Power over Ethernet” in

Specifications

later in this manual before purchasing a PoE

adaptor.

1.4 GPS Support

Attached with the GPS receiver, the GV-Video Server allows you to perform vehicle
tracking on Google Maps. The models supporting GPS function include:

•

GV-VS02 (Hardware Version 2.0), GV-VS02A and GV-VS12.

The GV-GPS Receiver comes in two types of interfaces, UART and RS-232. Different
models of the GV-Video Server support different interfaces.

•

UART: GV-VS02 (Hardware Version 2.0), and GV-VS02A

•

RS-232: GV-VS12

2

«
...
8
9
10
11
12
...
»

Содержание GV-VS12






































































































































Отзывы:

Нет отзывов