Figure 4-34
PIN number:
Type the PIN number that is provided by your network operator.
Access Point Name (APN):
Type Access Point Name that is provided by your
network operator.
Username:
Type a valid username to enable the UMTS service from your network
operator.
Password:
Type a valid password to enable the UMTS service from your network
operator.
Maximum Transmission Unit:
Type the Maximum Transfer Unit (MTU). The default
value is 1500.
Retain UMTS Connection:
Select this option to check the UMTS connection status
and use the drop-down list to specify the desired time length for check frequency. The
GV-Video Server will rebuild the connection if disconnection is detected.
Enable VPN Connection:
Select this option to enable the VPN (Virtual Private
Network) connection. Type the target IP address in the
Check Target IP Address
field.
UMTS Authentication Protocol:
Use the drop-down list to select the UMTS
Authentication Protocol provided by your network operator.
Enable Schedule Mode:
Starts the UMTS connection automatically based on the
schedule you set in the
Select Schedule Time
section. Refer to
4.5 Recording
Schedule
for the same settings.
Enable DNS:
Optional type up to two DNS servers of your network operator.
3G Connection Status:
Indicates the connection status of UMTS or VPN.
Note:
When both WiFi and 3G are available, the device will automatically choose WiFi for
network connection. This function is only supported in GV-VS12 and GV-VS14.
84
Содержание GV-VS11
Страница 43: ...Administrator Mode 4 Figure 4 3 35 ...