Administrator Mode
4
4.1.6 Tampering Alarm
Note this option is available for
GV-VS04H
(Firmware Version 1.03 or later),
GV-VS11
,
GV-VS12
(Firmware Version 1.02 or later), and
GV-VS14
.
The Tampering Alarm is used to detect when a camera is being physically tampered. An
alarm can be generated when the camera is moved, covered up, or out of focus. The
alarm approaches include the triggered output device, e-mail alerts and system buzzer. To
have the tampering alarm, first set up these alarm approaches properly:
•
To trigger the output device when a tamper event occurs, enable the output setting and
select
Tampering Alarm
for the related camera. See
Output Setting
in
4.2.2
Input/Output Settings
.
•
To trigger the e-mail alert when a tamper event occurs, enable the e-mail setting and
select
Tampering Alarm
for the related camera. See
4.3.1 E-Mail.
•
To trigger the system buzzer when a tamper event occurs, enable the buzzer setting.
See 4
.2.4 Buzzer
.
Figure 4-8
43
Содержание GV-VS11
Страница 43: ...Administrator Mode 4 Figure 4 3 35 ...