GeoVision GV-VS11 Скачать руководство пользователя страница 78

Страница: 78 / 185

4.3.9 3GPP/RTSP

The 3GPP / RTSP Server enables video and audio streaming to your 3G-enabled mobile
phone.

Figure 4-27

Activate Link:

Enable the 3GPP / RTSP service.

RTSP/TCP Port:

Keep the default value 8554,

or modify it if necessary.

RTP/UDP Port:

Keep the default range from 17300 to 17319, or modify it if necessary.

The number of ports for use is limited to 20.

Max Connection:

Set the maximum number of connections to the GV-Video Server.

The maximum value is 20.

Enable Audio:

Enable audio streaming.

Disable Authentication:

By default, when accessing live view through RTSP

command, the ID and password of the GV-Video Server are required. Select this
option to disable the authentication prompt. For details on the RTSP command, see

Appendix D

For details on remote monitoring with mobile phones, see

10.4 3G Mobile Phone

Содержание GV-VS11


























































































































































































Результаты поиска

Содержание GV-VS11

Отзывы:

GeoVision GV-VS11, Руководство пользователя, Страница: 78 / 185

Результаты поиска

Содержание GV-VS11

Отзывы: