3.2 Turning on and off the Power
The GV-Mobile NVR System is designed to connect to the vehicle’s ACC wire. However, you
can optionally purchase a power adapter (AC 100 ~ 240V) from GeoVision for power
connection.
3.2.1 Connecting to the ACC Wire
To turn on the GV-Mobile NVR System, connect the vehicle’s ACC and power wires to the
unit’s power input using the supplied 3-pin terminal block. The system will automatically start
after you power on the vehicle for 5 seconds.
After you power off the vehicle for 3 seconds, the system will turn off automatically.
3.2.2 Using the Power Adapter
To turn on and off the GV-Mobile NVR System using an optional power adapter from
GeoVision, follow the steps below.
1. Plug the 3-pin terminal block connected with power adapter to the panel’s power pins. The
GV-Mobile NVR System will be powered on about 5 seconds later.
Figure 3-3
2. To turn off the GV-Mobile NVR System, shut down the system through the Windows
desktop.
10
