background image

   

Introduction 

 

Chapter 1  Introduction 

Designed to withstand rugged environment, GV-Mobile NVR System operates at a wide 
range of temperature and comes with anti-vibration protection, making it ideal for railways, 
public transits and industrial environment. For storage, it offers up to 2 hot swappable bays of 
HDD or SSD choice. With built-in GV-NVR, this fanless Mobile NVR system supports up to 32 
channels of GV-IP megapixel cameras to provide an all-in-one solution (Live View, Playback, 
Recording, Backup, CMS) for rough conditions. 
 
Recording solution for harsh environment: 

 

 

1.1  Features 

  Powered by Intel Atom / Core i3 Processor 

  64-bit Windows Embedded Standard 7 SP1

 

 GPU Decoding

 

  Up to 2 Hot Swappable HDD / SSD bays for up to 2 Terabytes 

 

 Fanless System 

  Vibration and Mechanical Shock Protection (2G at 5 ~ 500 Hz for SSD) 

  Power Ignition Management (ACC) 

  Wide Operating Temperature (-30°C ~ 70°C / -22°F ~ 158°F for SSD) 

  2 Gigabit LAN Ports 

  Dual-monitor Display (VGA and DisplayPort) 

  Wireless Communication (WiFi / 3G / 4G) 

  GPS Support for Vehicle Tracking 

 Built-in GV-NVR 

  Up to 32 Channels 

  3rd Party IP Cameras with H.264 Compatible (License Required) 

  Automatic Connection to GV-IP Cameras 

 Video Analysis 

  Dual Video Streams   

  Fisheye Dewarping Function 

  Smart Device Access (iOS and Android) 

  E-Mark, EN50155 Certified 

                                 

1

 29 Languages

 

Содержание GV-Mobile NVR System














































































Отзывы: