GeoVision GV-IP SERIES Скачать руководство пользователя страница 98

Страница: 98 / 136

Administrator Mode

◼

Clear alarm:

After an alarm is triggered,

⚫

If the same alarm is not triggered within the set time, the alarm will be cleared and

the same alarm can be reported again.

⚫

If the same alarm is triggered within the set time, the alarm will not be cleared until

the suppress alarm time expires. Then the same alarm can be reported again.

6. For

Trigger Actions

and

Plan

, follow

Step 5 ~ 6

3.5.1.1 Cross Line

Note:

1. For the

Upload to FTP

function, make sure to configure the settings in

4.8.3 FTP

and

4.3.3 Snapshot

first.

2. For the

Trigger e-mail

function, make sure to configure the settings in

4.2.6 E-mail

and

4.3.3 Snapshot

first.

3. For the

Trigger storage

function, make sure to configure the settings in

4.8.1 Storage

Содержание GV-IP SERIES









































































































































Результаты поиска

Содержание GV-IP SERIES

Отзывы:

GeoVision GV-IP SERIES, Руководство пользователя, Страница: 98 / 136

Результаты поиска

Содержание GV-IP SERIES

Отзывы: