GeoVision GV-IP SERIES Скачать руководство пользователя страница 111

Страница: 111 / 136

100

4.9 Security

Note these functions are NOT for

GV-SD2322-IR

This section allows you to create user accounts and set the network security settings.

4.9.1 User

There are two types of accounts:

Administrator

and

Common User

◼

Administrator:

The default name of the administrator is admin, which cannot be

modified. Admin has full permission and can manage all users and devices. Only one

admin account is allowed in the system.

◼

Common Users:

User only has permission to play live and recorded video. Up to 31

common users are allowed in the system.

The administrator can create new account for a common user. After the user is added

successfully, the administrator can change the password by entering the new password or

delete the user by clearing the username.

Figure 4-70

Note:

Changing the username or password for a user when the user is still logged in will

force the user to log out. The user must use the new username or password to log in.

4.9.2 Network Security

There are five network security settings:

HTTPS

RTSP Authentication

ARP Binding

Address Filtering,

and

Access Policy

Содержание GV-IP SERIES









































































































































Результаты поиска

Содержание GV-IP SERIES

Отзывы:

GeoVision GV-IP SERIES, Руководство пользователя, Страница: 111 / 136

Результаты поиска

Содержание GV-IP SERIES

Отзывы: