GeoVision GV-IP SERIES Скачать руководство пользователя страница 85

Страница: 85 / 136

4.6.4 Intrusion

With Intrusion Detection, an alarm is generated when an object enters the boundaries of the

detection area. Up to 4 detection areas can be added. Note that it is recommended

NOT

overlap the detection areas when adding multiple detection areas. Select the checkbox next

Intrusion

to enable and click

to configure.

Figure 4-42

1. Once enabled, click

to mark the live view with a detection area. Repeat this step to

add another detection area.

2. Drag the nodes of the detection area to mark the boundary for detection.

3. You can use the following functions to reduce false alarm.



Time Threshold:

The minimum period of time for a person to stay within the

detection area before an alarm is triggered.



Sensitivity:

Move the slider to adjust the detection



Percentage:

Type the minimum size of the person compared to the detection area

for the person to be detected. (for

GV-SD2722-IR / SD3732-IR

)



Level:

Set the priority of detection to judge the trigger sequence when multiple

detection rules are triggered at the same time.



Detection object:

Set the type of detection object to judge whether to trigger

detection.

Содержание GV-IP SERIES









































































































































Результаты поиска

Содержание GV-IP SERIES

Отзывы:

GeoVision GV-IP SERIES, Руководство пользователя, Страница: 85 / 136

Результаты поиска

Содержание GV-IP SERIES

Отзывы: