4.4 Configuring the Wireless Connection
Follow the steps below to set up wireless connection to your GV-Fisheye Camera
(GV-FE2302 / 2303 / 3402 / 3403 / 4302 / 4303 / 5302 / 5303 only).
1. To set up the wireless LAN for the first time, power on the camera, connect a standard
network cable and insert a WiFi adapter.
2. An IP address will be automatically assigned to the camera. Use GV IP Device Utility to
search for the device. For details, see
4.2 Looking Up the Dynamic
IP Address
.
3. Configure the wireless settings.
A.
On the Web interface, select
Network
, select
Wireless
and
Client Mode
. This
dialog box appears.
B.
Type the Network Name (SSID) or click the
Access Point Survey
button to search
and select for the available Access Points/wireless stations.
C. Select
Ad-Hoc
or
Infrastructure
for the Network type.
D. Select
the
Authentication Type
using the drop-down list. You can also obtain this
information by clicking the
Access Point Survey
button.
E. Type
the
WPA-PSK Pre-shared Key
or
WEP
depending on the encryption setting
for the Access Point.
F. Click
Apply
to save the configuration.
33
