Getting Started
29
3
Chapter 3 Getting Started
3.1 Basic Installation
This section describes all the equipments required to program and operate the GV-Hot Swap
DVR V5. Up to 2 monitors can be connected to the GV-Hot Swap DVR V5. Here we use the
4U (20-bay) models of GV-1480H / GV-1240H / GV-1120H V5 (32-Ch) as the example.
Figure 3-1
1. Using the VGA cable supplied by the monitor manufacturer, connect the VGA monitor.
2. Using the supplied power cord, connect one end to the AC input and the other end to the
power outlet.
3. Connect the keyboard to the USB port.
4. Connect the mouse to the USB port.
5. To listen to audio of video source, connect speakers to the Audio Line Out port.
6. Using the supplied DVI audio cables, connect one end to the DVI audio ports and the other
end to the microphones.
7. Using the supplied DVI video cables, connect one end to the DVI video ports and the other
end to the cameras.
8. Using the RJ-45 cable, connect one end to the Ethernet port and the other end to Network.
Note:
The monitor you use must be capable of having a screen resolution of 1280 x 1024 and
display color of 32 bits.