Geotech Filter Bucket, Инструкция по установке и эксплуатации

Страница: 7 / 24

5
Section 3: System Operation
When properly deployed, and before product has accumulated in the reservoir, the Filter
Bucket should sit in the water as shown in Figure 3-1. As product passes through the
cartridge, it falls into one of the two hoses and is gravity fed through the bucket wall and
through a small check valve. When the cover of the bucket is removed, product can be
seen flowing into the bucket. The rate of flow into the Filter Bucket is dependent upon the
viscosity of the product and the thickness of the slick (See
Section 6: System
Specifications ).
As product accumulates in the reservoir, the Filter Bucket will ride lower in the water as
shown in image C of Figure 3-1. At the same time, the product level indicator shaft will be
extended through the top of the bucket. The Filter Bucket is designed so that the reservoir
will cease taking on product just as the cartridge contacts the bucket handle.
Figure 3-1: Filter Bucket Operation
A
B
C