Geotech Filter Bucket, Инструкция по установке и эксплуатации

Страница: 11 / 24

9
Debris
Presence of debris at the oil/water interface may reduce the product flow rate. Most debris
accumulates on the mesh when a large volume of product enters the cartridge. Debris is
easily removed when cleaning the cartridge. Often, the unit may be gently pulled up and
down in its site area to remove some of the accumulated debris.
Product Type Recovered
The Filter Bucket will recover any non-polar liquid with a density less than water. This
leaves out such dense materials as chloroform, carbon disulfide, carbon tetra-chloride and
Freon. Certain materials will dissolve the housing and cartridge seals, but the unit may be
used in an emergency or if concentrations of such materials are low. These materials are
usually aromatics: common ones are benzene, xylene, toluene and styrene monomer.
Materials that can readily be recovered include gasoline, kerosene, oils, hexanes,
heptanes, octanes, petroleum, napthas, pentanes, or mixtures of the above.