Geotech 601031 Скачать руководство пользователя страница 2

WARRANTY

The EcoSense® pH100A/pH100M Instrument is warranted for one year 
from date of purchase by the end user against defects in materials and 
workmanship. pH100A/pH100M probes and cables are warranted for six 
months from date of purchase by the end user against defects in material 
and workmanship. Within the warranty period, YSI will repair or replace, at 
its sole discretion, free of charge, any product that YSI determines to be 
covered by this warranty.

To exercise this warranty, write or call your local YSI representative, or 
contact YSI Customer Service in Yellow Springs, Ohio. Send the product 
and proof of purchase, transportation prepaid, to the Authorized Service 
Center selected by YSI. Repair or replacement will be made and the 
product returned, transportation prepaid. Repaired or replaced products 
are warranted for the balance of the original warranty period, or at least 90 
days from date of repair or replacement.

Limitation of Warranty 

This Warranty does not apply to any YSI product damage or failure caused 
by: (i) failure to install, operate or use the product in accordance with 
YSI’s written instructions; (ii) abuse or misuse of the product; (iii) failure 
to maintain the product in accordance with YSI’s written instructions or 
standard industry procedure; (iv) any improper repairs to the product; (v) 
use by you of defective or improper components or parts in servicing or 
repairing the product; or (vi) modification of the product in any way not 
expressly authorized by YSI.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR 
IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS 
FOR A PARTICULAR PURPOSE. YSI’s LIABILITY UNDER THIS WARRANTY 
IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, AND THIS 
SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY DEFECTIVE 
PRODUCT COVERED BY THIS WARRANTY. IN NO EVENT SHALL YSI BE 
LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL 
DAMAGES RESULTING FROM ANY DEFECTIVE PRODUCT COVERED BY 
THIS WARRANTY

Contact Information

YSI
1725 Brannum Lane
Yellow Springs OH, 45387, USA
Tel: 800-897-4151 • 937-767-7241; Fax: 937-767-1058
E-mail: [email protected]
Web: ysi.com

Содержание 601031





















Отзывы: