Geotech 0.675, Инструкция по установке и эксплуатации

Страница: 17 / 35

15
6. Clean and prepare replacement parts as needed.
Bottom Intake Assembly
1. Pull the Check Ball Retainer from the Bottom Intake Assembly.
Figure 4-7a: Check Ball
Retainer
Figure 4-7b: Removing Check
Ball Retainer
Figure 4-7c: Check Ball
Retainer Removed
2. Remove the SS Check Ball from the inside of the Bottom Intake Assembly.
3. Remove all O-rings on the assembly.

If needed, use a flat object to help the O-rings out of the grooves on the
Bottom Intake Assembly

Do not over-stretch, damage, or puncture the O-rings in any way.
4. Clean and prepare replacement parts as needed.
Bottom Intake Reassembly
1. Install O-ring (#17500119) in the groove on the Check Ball Retainer.

Ensure that O-rings are not twisted.
Figure 4-8: Check Ball Retainer O-ring