GEOSUN eFix R1, Инструкция по эксплуатации оборудования

Страница: 35 / 41

29
Transmitting Radio Introduction
Front Panel
Indicator Description
Power Power indicator
TXD Transmitting indicator
RXD Receiving indicator
AMP PWR RF power output high/low indicator. When lit, it indicates that the RF
output power is set high. When black, it indicates that the RF output
power is set low.
Button Description
ON/OFF
Power switch. Turn the PDL station on by pressing the ON/OFF button
and holding it until the channel display indicator is lit. Turn off the PDL
station by pressing the ON/OFF button until the display goes black.
There is a one-second turn-off delay in the power button to prevent
inadvertent turn-off.
CHANNEL
The CHANNEL button is used to display and change the channel. Press
the CHANNEL button momentarily to display the selected channel. To
change the channel, press the CHANNEL button once to light the
display, and then again to change the channel. Use the CHANNEL
button to select the "b" setting. With "b" selected, the PDL will be
placed in transmitting mode. This mode selects the channel for
transmission automatically.