Geosignal XP 101K USB, Руководство пользователя

Страница: 6 / 24

Getting Started
Initialising
• The data logger is password protected and needs to be
initialised before use. Each data logger has a different
password (code) which is required for erasing and initialising.
• Please keep the code in a safe place as it is always required
for erasing the memory.
• Pull to remove the waterproof cap and connect the data
logger to a USB socket of a USB host enabled device (PC,
tablet, etc), to guarantee waterproofness make sure that a
layer of silicon grease is always present on the o-ring.
• The data logger will appear like a USB disk storing three files:
and DATALOGS.CSV, CONTROL.TXT, and CALIBRAT.TXT.
Open the file CONTROL.TXT with a simple text editor. If your
system does not have a native text editor please install one
before using the logger. We have tested Notepad on
Windows, Gedit on Ubuntu, and Ted on Android 4.0.
• Please note that some Android devices have no host
capability, others do not immediately open USB drives and
require a specific app to manage USB drives, check with
device specifications for USB Host capability.
• The latest Mac versions can open the logger in read only
mode an error message is shown “Cannot repair disk”:
however this logger works up to Snow Leopard. In this case
Mac users should install a “Virtual Machine” (VirtualBox) that
can be downloaded for free and run a Snow Leopard image or
a free Linux image or a Windows one to program the device.
However the logger remain fully readable by the latest Macs
OS Versions: Data can be downloaded (sampling will resume
once the device is unplugged, excluding millisecond
sampling).
Geosignal XP 101K USB Data Logger
Copyright 2017-2018 all rights reserved
www.geosignal.com.au
6