Geosignal XP 101K USB, Руководство пользователя

Страница: 20 / 24

Troubleshooting
Datalogger does not connect to PC
•
Battery flat: allow a few minutes to charge
•
Perform a reset: Please try a few times.
Inconsistent date and time or keep showing “pgm” without starting
•
Reprogram date and time unplug and re-plug the data logger.
•
Perform a reset: Please try a few times.
Datalogger does not program scan rate or date and time:
• After saving CONTROL.TXT make sure device is unmounted
or “Safely removed”
Datalogger is connected but an error is produced when downloading
data file:
•
Erase memory
Measures downloaded are inconsistent:
• Change the operating range to one more appropriate.
Datalogger does not store data:
• Scan rate was not programmed or mistake in setting the
starting date and time. Always check twice for the correct
start time and for correct parameters (case sensitive) before
saving CONTROL.TXT.
• Out of Memory: Erase memory
Geosignal XP 101K USB Data Logger
Copyright 2017-2018 all rights reserved
www.geosignal.com.au
20