www.glorystar.tv
Toll Free 866-597-0728
7
Slight clockwise or counter clockwise adjustments to the
LNBF rotation
or
sliding the LNBF
towards the reflector or away from the reflector may also
provide increased Signal Quality readings.
Change between
Channels 901, 113 and 106
and balance for
Peak Signal
Quality
readings on these three channels. The Glorystar system will have the
best performance when the Signal Quality Levels are peaked and balanced on all
channels and weakest channel has a Signal Quality reading at or above 60%. If
you must to exit the installation process before the three channels are optimized or
if the power is removed, the receiver will return to step # in the set-up screens.
When the dish aiming is complete, tighten all dish hardware to permanently
hold the dish in this position.
7.
8.
9.
Select
“
Aiming Complete
- Continue
” and press
OK
key to
automatically update the satellite
receiver with the latest Glorystar
channels. This process may take up to
0 minutes and the update progress will
be displayed. Please be patient and wait
for the receiver to automatically power
down and restart with a complete
channel list installed.
If the update progress does not progress
in 5 minutes, remove the power cord
for 0 seconds then reinsert to return to
step # in the set-up screens.
20.
If the dish is not properly aimed and the satellite signal is not strong enough, the
receiver cannot be updated. The receiver will immediately exit the update and
display “No Signal” or one of the three pre programmed channels. Remove the
power cord for 0 seconds then reinsert to return the receiver to return to step #
in the set-up screens.
Congratulations! The Satellite dish is now aimed and the receiver is updated with
the latest firmware and Glorystar Channel List. The Glorystar channel list will be
automatically updated each week.
You may set you favorite channels lists and scan in additional free channels on
the satellite. These settings and channels will not be deleted during the weekly
Glorystar channel updates. This receiver also records your favorite programs.
Simply attach an USB hard drive to the USB port on the back of the receiver and
press record.
