6
Once the correct satellite is
detected, the
Signal Quality
reading
will appear and increase from a low
quality Red color meter display to a
stronger signal indicated with Yellow
and a Green meter display when the
Signal Quality reading is good.
Continue to optimize the dish
aiming by making very
small changes
to the
elevation
(up/down) and
azimuth
(left/right) to peak the Signal
Quality reading. Failure to optimize and
maximize the Signal Quality reading
may result in the loss of programming
during inclement weather.
When the dish is correctly aimed,
the RT News Channel programming
will be displayed and the Signal Quality
reading will read 60% or higher.
0.
.
2.
Almost There! Adjust a Little More...
Great Quality Reading above 60%
Press the
CH/DOWN
arrow key
on the remote control to select
Channel
#113, Cornerstone
.
Verify the Signal Quality
reading is at least 60% and displaying
Cornerstone programming. If the
Signal Quality is less than 60%, make
very small adjustments to fine tune the
dish elevation and azimuth (side to
side).
3.
.
Quality Reading above 60%
Press the
CH/DOWN
arrow
key to select
Channel #106 , 3ABN
English
.
Verify the
Signal Quality
reading is at least
50%
and displaying
a picture. If the Signal Quality is less
than 60%, make very small adjustments
to fine tune the dish.
5.
6.
The Signal Level (S) is important when determining if the receiver is
connected to a working LNBF. A Signal Level reading of 50% or higher
indicates a connection to a working LNBF, but does not indicate finding
the correct satellite.
