GEORGE FISCHER +GF+ SIGNET 9020 Intelek-Pro, Инструкция по эксплуатации

Страница: 22 / 44

3.4 Standard Keypad Sequence
The following sequence is used to view, modify,
and exit
all
menu functions. Familiarize yourself
with this procedure before attempting CAL and
BATCH menu setup (sec. 3.5 and 3.7).
1. Press:
MOD
to enable calibration sequence.
2.
Enter security code (when active) using:
BATCH RESUME
FLOW
; enter entire 4-digit code for full
menu access
OR
the 2 least significant digits for
BATCH (only) menu access; press:
ENTER
to confirm.
(The Security code is factory preset to 0000).
3. Select menu:
CAL
or
BATCH
; press menu key
repeatedly to scroll through menu.
4. Press:
MOD
to select the item for modification.
5.
Modify item using:
BATCH RESUME
FLOW
; press:
MOD
to recall previous value OR
ENTER
to save.
6. Press:
CAL
or
BATCH
to view next menu item.
7. Repeat steps 4-6 to modify each menu item.
Exit menu by pressing:
FLOW
To exit or advance menu you must first
press:
ENTER
to save changes OR press:
MOD
to
restore previous value, followed by:
FLOW
to exit
menu and return to normal operation.
16
This function can be disabled
via internal dip switch settings.
See section 4.3 for details.
Cannot exit menu
while editing?