GEORGE FISCHER +GF+ SIGNET 9020 Intelek-Pro, Инструкция по эксплуатации

Страница: 20 / 44

14
9. Display contrast:
Changes LCD contrast for
best visibility.
10. Security code selection: Changes the 4-digit
security code. When enabled, the security code
prevents unauthorized menu changes. Two security
levels are provided:
• Enter
entire 4-digit code for complete access
• Enter two least significant digits for BATCH
menu access only.
The security function can be disabled by changing
an internal dip switch setting (sec. 4.3). When
disabled, the security function is removed from the
CAL menu.
11. Auto cal mode:
Calculates a custom K-factor
based on volumetric measurement for more precise
dispensing. This process will compensate for
installation abnormalities or non-standard pipe
sizes, and allows the operator to compensate for
slow valve closure time or pipe run-off. Auto cal
requires an accurate measurement reference
container.
3.3 BATCH Menu Functions
1. Batch size: Changes the batch size. This
value represents the same engineering units as the
K-factor entry.
2. Batch decimal: Changes the batch size
decimal position.
3. Batch mode:
Changes the batch mode. In
quantity mode , a user entered number of batches
are dispensed, separated by a user set time delay.
In
continuous mode , operation is identical, except
that the process repeats until the STOP key is
pressed.
Batch decimal:
X.XXXX - 4, XX.XXX - 3,
XXX.XX - 2, XXXX.X - 1,
XXXXX - 0
Batch size:
.0001 to 19999
Security code selection:
0000 to 9999
XXXX
= Full access
XX
XX
= Batch menu access
only