GEORGE FISCHER +GF+ SIGNET 2550, Инструкция по эксплуатации

Страница: 22 / 36

18
3.5 Display options
The last four main menu functions change the
displayed information. The first two also change
the output values.
3.5.1 Operational outputs
The "Rate Electronic" and "Rate User" functions
change both the display and the output values in
the magmeter.
• RatE selects the standard calibration value based
on entered pipe id as the basis for all outputs.
• RatU selects the "Cal B" value as the basis for all
outputs.
Code entry is not necessary to change the display
setting.
RUN
EDIT
ENTER
3.
4.
5.
6.
2.
1.
The display and all outputs
adjust to the new selection
when the enter key is pressed.
Step: Press: To display:
RatE is the factory default
setting.
Example illustrates changing
display setting to StdE.
Use the up arrow to move
quickly to the display options.