Geometrics Memory-Mag G-856AX, Руководство по эксплуатации

Страница: 29 / 60

Geometrics, Inc
.
G-856AX Operation Manual
23
AUTO , STORE, ENTER
If you wish to revert to the standard manual store mode press:
AUTO , STORE, CLEAR
7 - Recalling measurements from memory
Magnetic field measurement values are stored sequentially in the consol memory. A
good way to visualize the console memory is to think of the data as being in a "stack" of
lines, where each line is made up of 2 parts; the first part being the
FIELD READING
and
STATION NUMBER
and the second part being the
TIME
and
LINE NUMBER
or
JULIAN
DAY.
The line number will appear if the reading was taken in Survey Mode. You will
see the Julian Day if the reading had been taken in Automatic Mode. An example of the
console memory structure is show in Table 1 below.
Table 1. An example of the console memory stack.
field station time line no.
67856.8 009 12.32.55 10
68645.5 008 12.32.30 10
68857.4 007 12.32.00 10
68682.9 006 12.32.54 10
68432.8 005 12.32.20 10
68845.7 004 12.31.59 10
68723.8 003 12.31.37 10
68245.6 002 12.31.02 10
68290.0 001 12.30.45 10
Console memory can be examined by pressing the RECALL key. When you do this the
first half of the latest line in the memory stack will appear in the display. If the console
memory contained the values shown in Table 1 then the console display would show the
following:
67856.8 FIELD/TIME
009 STATION/DAY
If you press
RECALL
again, the memory decrements, and the next reading will be
displayed:
68645.5 FIELD/TIME
008 STATION/DAY
Pressing
RECALL
will continue to decrement the memory and each reading in the
sequence will be displayed. Pressing
ENTER while the display is still lit
will increment the
memory. In a large stack of data, it is not necessary to keep depressing
RECALL
or
ENTER
until the desired reading is found. In cases where you wish to look at a particular
reading (nn for example) you would press: