Geometrics Memory-Mag G-856AX, Руководство по эксплуатации

Страница: 15 / 60

Geometrics, Inc
.
G-856AX Operation Manual
9
and clip the shoulder strap to the D-ring on the console holster as shown in Figure
6b. Do the same with the waist strap and then repeat this procedure on the other
side of the holster. Adjust the harness so that the console is centered on your
torso as shown in Figure 6c.
a b c
Figure 6. G-856 Shoulder harness.
7) Raise the sensor staff assembly to a vertical position and hold it steady for 3-4
seconds before taking a reading. Figure 7a shows the completed assemble ready
for measurement. Figure 7b shows an alternate method for carrying the staff with
the sensor with its central axis vertical. This method uses the saddle mount as the
attachment point for the staff and will require a non-magnetic counter weight
(available from the factory).
a b
Figure 7. Assembled magnetometer.
8) Verify that the console is powered and properly connected to the sensor by
momentarily depressing the
READ
key. The position of this key is shown in
Figure 8. The displays will light, turn off, then light again for 5 seconds. If the