background image

Zone20 H

 | 6

Safety Directions

CAUTION

During the transport, shipping or disposal of batteries it is possible for inappropriate mechanical influences 
to constitute a fire hazard.
Precautions:
Before shipping the product or disposing of it, discharge the batteries by running the product until they 
are flat.
When transporting or shipping batteries, the person in charge of the product must ensure that the appli-
cable national and international rules and regulations are observed. Before transportation or shipping 
contact your local passenger or freight transport company.

WARNING

During dynamic applications, for example stakeout procedures there is a danger of accidents occurring if 
the user does not pay attention to the environmental conditions around, for example obstacles, excava-
tions or traffic.
Precautions:
The person responsible for the product must make all users fully aware of the existing dangers.

WARNING

If you open the product, either of the following actions may cause you to receive an electric shock.

Touching live components

Using the product after incorrect attempts were made to carry out repairs

Precautions:
Do not open the product. Only GeoMax authorised service workshops are entitled to repair these products.

WARNING

If the product is improperly disposed of, the following can happen:

If polymer parts are burnt, poisonous gases are produced which may impair health.

If batteries are damaged or are heated strongly, they can explode and cause poisoning, burning, corro-
sion or environmental contamination.

By disposing of the product irresponsibly you may enable unauthorised persons to use it in contraven-
tion of the regulations, exposing themselves and third parties to the risk of severe injury and rendering 
the environment liable to contamination.

Precautions:

Product-specific treatment and waste management information can be downloaded from the GeoMax 
website at http://www.geomax-positioning.com/treatment or received from your GeoMax distributor. 

WARNING

Only GeoMax authorised service workshops are entitled to repair these products.

WARNING

High mechanical stress, high ambient temperatures or immersion into fluids can cause leakage, fire or 
explosions of the batteries.
Precautions:
Protect the batteries from mechanical influences and high ambient temperatures. Do not drop or immerse 
batteries into fluids.

WARNING

If battery terminals are short circuited e.g. by coming in contact with jewellery, keys, metalized paper or 
other metals, the battery can overheat and cause injury or fire, for example by storing or transporting in 
pockets.
Precautions:
Make sure that the battery terminals do not come into contact with metallic objects.

The product must not be disposed with household waste.
Dispose of the product appropriately in accordance with the national regulations in 
force in your country.
Always prevent access to the product by unauthorised personnel.

Содержание ZONE20 H































Отзывы: