12
MAX mode
•
Press the MAX key to enter the MAX mode. The thermometer
then records and updates the maximum values and the MAX
icon appears on the display.
•
Press the MAX key again to exit the MAX recording mode.
In the MAX mode, press HOLD key to stop recording,
press HOLD again to resume recording.
Backlight mode
•
Press the backlight key to turn on the LCD backlighting
function. The LCD backlighting will auto-off after the backlight
key is released approximately 5 seconds.
Tc (temperature compensator) checking mode
•
Press and hold the “Tc” key to enter the temperature compen-
sator checking mode. The thermometer will display inside
temperature.
CARE AND CLEANING
Change of battery
•
If symbol is displayed the 9V battery must be replaced.
•
Turn the meter off and disconnect the temperature probe.
•
Remove the rubber holster that surrounds the entire meter by
•
pulling it over the top of the meter.
•
Remove the small head screw on the rear of the meter.
•
Open the battery compartment and replace the 9V battery.
•
Re-assemble the meter before operating.
SAFTEY INSTRUCTIONS
Please follow up instructions given in operators’ manual.
Содержание FT 1300-1
Страница 23: ...23 ...