22
EN
FUNCTION SETTING METHOD
· Power on and press 0SET“ simultaneously to enter the function setting mode.
· Press “0SET“ or “HOLD“ to select the items (1 - 4).
· Press “R/L“ or “V%“ to change the setting of the selected item.
· Set the desired function.
· Press “SFT“ to finish the function setting and return to the normal angle measuring mode.
ERROR DISPLAY
Display
Error Content
E01
The vertical angle “0” position is out of range or set with an incorrect procedure.
E04
Internal memory system error.
E05
Reserved for factory adjustment.
E06
Failure in the angle measuring system.
E07
Rotation speed of the telescope was too fast (over 4 r/s).
E08
Angle measuring system error. The instrument should be powered off/on to eliminate
this error.
