Genway CM-03NL, Руководство пользователя

Страница: 2 / 28

52
Instructions for relay equipment wiring
¡
VM-03N video amplifier
Connect VCC,GND terminal with DC12V power's positive and negative polarity
respectively
(2)VFO,GND is one video output, connect with network equipment's TV+, TV-
respectively
(3)VF1~VF3, GNDare three video outputs, connect VF1~VF3 terminal with network
equipment's TV+, and connect GND terminal with network equipment's TV-
(4)VCOM,AUDIO+are three audio ports, it is convenient for user only, you can
connect audio wire with VM-03N, also you can select not connect audio wire
with VM-03N.
)?(
INDICA
TION
VM-03N
VIDEO AMPLIFIER
VF1 GND VF2 GND VF3 GND
GND VCC VCOM AUDIO+ VCOM AUDIO+ VCOM AUDIO+ GND VF0
3 audio prepared port,
can or not connect with
network equipment
audio terminal
12V power
VCOM
AUDIO+
VCOM
AUDIO+
VCOM
AUDIO+
VF0 GND
1 video output port,
connect with network
equipment's video
input terminal
3 video input port, connect with network
equipment video output terminal
¡
¡ ¡
¡ ¡
¡ ¡ ¡ ¡
¡ ¡
¡ ¡
¡ ¡
¡ ¡
VM-01T video sender & VM-01R video receiver
(1)VM-01T video sender: +12V,GND terminal connect respectively with DC12V
power's positive, negative polarity. VIDEO,GND connect with camera;
VIDEO+,VIDEO- connect with VM-01R's VIDEO+,VIDEO-
(2)VM-01R video receiver: +12V,GND terminal connect respectively with
DC12V power's positive, negative polarity. VIDEO,GND connect with CRT
or monitor's video input and video GND; VIDEO+,VIDEO- connect with
VM-01T's VIDEO+,VIDEO-
12V
GND
GND
VIDEO
VIDEO-
VIDEO+
12V
GND
GND
VIDEO
VIDEO-
VIDEO+
12V
GND
GND
VIDEO
Camera
12V
power 12V
GND
GND
VIDEO
CRT or
monitor
VIDEO+
VIDEO-
VIDEO+
VIDEO-
VM-01T video sender VM-01R video receiver
2-coaxial wire
Note: there is an electrograph(RV1), switch(SW1) in VM-01R video receiver's
electronics board, RV1 is whiteness adjuster, SW1 is color adjuster. Dial SW1
downward to switch it ON, normally, when distance is 500 m, 1 is ON, others are
OFF; When the distance is 800 m, 1 , 2 are ON, others are OFF; when the
distance is 1200 m, 1 , 2 , 3 are ON, others are OFF; when the distance is
1500 m, the above are ON( 1 , 2 , 3 are dialing times). Please select
accordingly when in actual use, and match RV1 to achieve the best video quality.
¡ ¡
¡ ¡ ¡ ¡
¡ ¡ ¡ ¡ ¡ ¡
¡ ¡ ¡ ¡ ¡ ¡
12V
power