9
100 mm
Condensation drain:
When changing the filter in August/September before
the outside temperature falls to 5°C, check that the
condensation drain is not blocked with dirt and make sure
that there is water in the water trap. Pour 1 litre of water
into the condensation tray and make sure it runs off freely.
If the condensation drain does not work, this could lead to
water damage in the home.
Heat exchanger:
Inspect the heat exchanger every year. If it is dirty, remove
it and:
- Alu-exchanger:
Wash in lukewarm soapy water and
rinse using a hand shower if necessary.
-
Plastic exchanger:
No cleaning with fluids (including
water); only careful dust removal from air intake surfaces
with a household vacuum cleaner.
Fans:
Inspect the two fan wheels for dirt each year. If they are
dirty, they can be washed using a brush, bottle cleaner,
etc.
Supply air and extract air valves:
Clean the valves by wiping with a dry cloth. Be careful that
the valves do not turn, so that the air volume changes.
Service:
If you are not able to maintain your system, you can make
a service agreement with the Genvex Service Department.
If any faults on the system arise, please contact the
Genvex Service Department.
