10
Subject to Technical Modifications of GES Energy Small and GES Energy Medium
G4 = Standard filter (Coarse filter class G4)
F7 = Pollen filter (Fine filter class F7)
Close filter
Open filter
Maintenance of plant
Turn off the electricity for the unit before
opening it
Filters
:
When the filter timer reaches the set value for filter
change, “Alarm!” will show in the screen saver and ”Chg.
filter” will flash. This means that it is time to clean/change
the filters.
Switch the unit off on the switch on the control panel
or the switch on the electrical panel. Open the front
doors and remove the filters. When the filters have been
cleaned/replaced, close the front doors and reset the
filter alarm by holding down the button below the filter
symbol, until ”Alarm!”, “Chg. Filter” and the exclamation
mark disappears in the filter symbol. The unit reverts to
normal operation.
If the wish is an other time interval this can be adjust in
the User menu.
The fresh air filter (F7) is in the left site of the unit and it
is higher than the extract air filter (G4).
Do not vacuum or clean at high air pressure. It
will damage the filter!
