background image

 

  

15

SPARE PARTS

Item no

.

Description

069282

TS fan housing

069252

Front cover RAL 9016

069231

Top plate for el. RAL 9016

069210

Exchanger, aluminium

069211

Exchanger, PET

069222

G4 filter

Item no

.

Description

069223

M5 filter

069224

F7 filter

060537

Bypass motor

069911

Built-in electric preheating surface 

1500 Watt (optional)

069875

Optima 270 control board

069252

069211

069210

069222

069224

069223

069222

060537

069911

069282

069282

069970

069875

Component 

Action 

Interval 

Filter

Replaced at regular intervals so that full efficien-

cy of the unit is achieved.

3–6 months

Fans

Fans are cleaned with a soft brush to ensure 

operational reliability and efficiency.

12 months

Countercurrent heat exchanger

Clean with water

12 months

Gaskets in general

Check gaskets on the unit and make sure they are 

intact

12 months

Supply air and exhaust air valves

Check for dirt in supply air and exhaust air valves. 

Clean as needed. Check that the valves have the 

desired setting in relation to air volumes.

12 months

Air intake

Check for dirt and grime in the air intake and 

exhaust, and clean as needed.

12 months

Ventilation ducts

Check the cleanliness of ducts and clean as 

needed.

10 years

Содержание ECO 375





















Отзывы: