background image

USER GUIDE CopyRIGht © 2012 GENthERM

advisory

PLEASE READ THE FOLLOWING INFORMATION 
CAREFULLY BEFORE USING THIS PRODUCT.

PLEASE SAvE THESE INSTRUCTIONS. 

As with all electrical products, the misuse of this product or failure 

to properly follow the instructions may cause overheating, fire, or 

personal injury.

Be sure the main control unit is used only on an AC supply 

current circuit of 110/220 volts.  Do not use with an extension 

cord.

It is recommended to use a surge protection device (not included) 

between the main control unit and the outlet. Failure to use a 

surge protector could cause product malfunction in the event of an 

electrical surge.

Do not use with damaged cords. Do not remove, trap, fold, cross or 

pinch any wires or cords. 

The main control unit should be placed on a dry, firm floor, in a 

well ventilated place, free from surrounding fabric.  Clearance of 

at least one (1) foot should be left on all sides.

Do not use the heat/cool feature of this bed with an infant, a child, 

an incapacitated person, a paraplegic, a quadriplegic, or if you 

are insensitive to heat or cool.  Keep all pets away from the main 

control unit and wiring. 

1.

2.

3.

4.

5.

2

Always unplug the MCU from the electrical outlet 

before cleaning.

Keep the cord away from the heated surfaces.

Do not use outdoors.

IMPORTANT SAFETY INSTRUCTIONS
DANGER

 — To reduce the risk of electric shock:

Содержание CCSS






















Отзывы: